Fibonacci Spiral Clock 30×30 #3DThursday #3DPrinting

Fibonacci Spiral Clock 30x30 by alfredo pironti Thingiverse

This clock would make for a great conversation piece in your home. From alfredo_pironti on Thingiverse:

This is a 146% scaled up version of https://www.thingiverse.com/thing:3955834, ideal to be printed on 30×30 bed printers (e.g. CR 10-S), using all available space.

When scaling, several details have been accounted for: the thickness of the dial, hour and minutes is enough to keep them rigid despite the increased size; holes are still ready to be mounted on standard quartz clockworks (in fact, minutes is given a non-round shape that should minimize slippage).

STLs are provided facing down (the clock visible face is printed against the bed): in my setup I print on a glass bed which gives a nice glossy finish. The models can be flipped is this is not desirable.

I printed the dial in white, and minutes and hours in black. I also glued a thin black cardboard behind the dial, to give the numbers adequate contrast.

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Ultimate Parametric Rugged Strorage Box #3Dprinting #3DThursday

Zx82net Ultimate Parametric Rugged Box Snap Closure by zx82net Thingiverse

zx82net shared this project on Thingiverse!

Remix of my original Rugged Storage Box with a new snap closure and easy two-finger opening.

Download files: https://www.thingiverse.com/thing:4786176


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The DARKSABER (a collapsing sword prop!) #3DPrinting #Timelapse

yeetkus shares:

And after watching season 2 of the Mandalorian I decided that a LIGHTsaber wouldn’t cut it. So I got to work. First I printed out 3DPRINTINGWORLD’s collapsing Sith Lightsaber so that I could take some measurements and get a feel for settings I would have to use to make a saber of my own. I then reverse engineered my own circular lightsaber, mirrored it, and made Darth Maul’s dual bladed lightsaber. Then finally after 5 or so different Fusion 360 files and about 22 different iterations on the final one to get a product I was happy with. I really wanted a saber with sharp faceted edges, a sleek overall feel, and something that was… darker.

Although the idea of a collapsing sword wasn’t mine this saber however. was completely made from scratch. However as mentioned I will credit 3DPRINTINGWORLD for the idea and some of the base measurements that I took from his printed file (not the digital one). The specific file I printed was this one https://www.thingiverse.com/thing:3668138

download the files on: https://www.thingiverse.com/thing:4754462


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Ez Arduino 12 DOF Quadruped Robot – Robot Dog Lassie #3DPrinting #Timelapse

manic-3d-print shares:

Since Boston Dynamics releases the quadruped robot – Spot, making robot dog has been very popular. There are number of attempts to build similar robot. Most are expensive and very difficult to follow and to make one. This instructable is trying to deliever a DIY version with 3D printing using very cheap hardware and electonic components. It should be affordable for everyone to build one easily, watch the assembly videos at step 6 – 8. This robot is controlled and played by using smartphone, see the software section to download the app.

download the files on: https://www.thingiverse.com/thing:4779990


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

2020 extrusion led mount #3DPrinting #Timelapse

bailboy91 shares:

I designed this mount in freecad to mount to the rear top cross beam of the prusa bear to light up the build plate with 7mm wide white LEDs strip lights. I’ve included the freecad files so you can modify to your liking.

download the files on: https://www.thingiverse.com/thing:4783567


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Sofle Keyboard Pimoroni Trackball Mount #3DPrinting #3DThursday

Sofle Keyboard Pimoroni Trackball Mount by foureight84 Thingiverse

foureight84 shared this project on Thingiverse!

Pimoroni Trackball mount for Sofle Keyboard.

You will need (4) M2 6+3mm Male-Female Standoffs and (4) M2 4mm Screws

For details on wiring and firmware: https://github.com/foureight84/sofle-keyboard-pimoroni

Download files: https://www.thingiverse.com/thing:4756591


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Pocket Blade Disposal Case #3Dprinting #3DThursday

 

 

mishkin2 shared this project on Thingiverse!

The idea was stolen from Olfa DC-5. I just felt sorry to pay $9. Besides, the DC-5 is too big to put in my pocket, and I have an alternative – in my pocket or a belt mount.

Holster style blade disposal container makes easy work of blade disposal.
A convenient way to safely dispose of dull blade edges, the portable Blade Disposal Holster can fits easily in your pocket or be attached to a belt or a tool-bag. It features two blade-snapping locations to accommodate various hand positions when snapping and disposing a dull blade segment. Simply slide the blade into a snap-slit and snap the blade for a new, sharp edge. The snapped segment will then safely dispose into the container.

Download files: https://www.thingiverse.com/thing:4778832


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Air Quality / Temperature Sensor (IOT) #3DThursday #3DPrinting

Air Quality Temperature Sensor IOT by scotthraban Thingiverse

Air quality is more important than ever these days. This tidy sensor-set up was shared by scotthraban on Thingiverse:

A project box to hold the bits for a air quality / temperature sensor.

Full project details are available here

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

9g Servo Light Switch Flipper #3DThursday #3DPrinting

9g Servo Light Switch Flipper by willreale Thingiverse

Update your light switches to iot with this handy switcher from willreale on Thingiverse:

Control any standard light switch with a 9g servo. The plate screws overtop any standard light switch. Attach a servo and plug it into a microcontroller like an Arduino for a fun easy project!

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Spiral Vase Mode cascading planter funnel thing #3Dprinting #3DThursday

Spiral Vase Mode cascading planter funnel thing by benjaminhill Thingiverse

benjaminhill shared this project on Thingiverse!

Stack a few of these, fill with dirt, nail to a backing, and presto – you have some cascading planter… things.

Download files: https://www.thingiverse.com/thing:4778100


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!