Posted on

RIZE Introduces Adaptive 2XC Desktop 3D Printer for Offices, Schools, and Homes

In 2016, Massachusetts-based 3D printing company RIZE Inc. released its first industrial-grade desktop 3D printer, the Rize One, renowned for its safety, low emissions, and elimination of post-processing. Then, in 2018, the company introduced the first industrial desktop AM solution for manufacturing full-color functional parts, the XRIZE system, which I was lucky enough to test out at RAPID 2019. Today, it’s announcing a new kind of desktop 3D printer, the professional RIZE 2XC, an adaptive system that was developed collaboratively with South Korean 3D printer manufacturer Sindoh.

I spoke with RIZE CEO Andy Kalambi ahead of the release, who told me that even during the ongoing COVID-19 pandemic, the company has been “very productive.”

“It’s been an interesting time, but rewarding,” Kalambi said.

He said that the RIZE team speaks every morning during a check-in meeting, to make sure everyone is doing okay and see if anyone needs help with a project. Even during lockdowns across the US, the company has been busy, 3D printing personalized face shields that were distributed to hundreds of essential and healthcare works in the Boston area and working on the new 2XC.

“Entirely during COVID times, we developed this new printer with Sindoh,” he told me.

The RIZE 2XC was engineered from home offices, and, according to a RIZE press release, is a testament “to the safety principles embodied in RIZE’s solutions – principles that are especially relevant today as organizations reinvent workflows for a return to office locations.” The business supply chain needs to be even more flexible now due to COVID, and RIZE says its new printer can help. The 2XC can be used at home – no need to worry about germs spreading from lack of social distancing – and in offices and classrooms, with no fear of releasing harmful airborne volatile organic compounds (VOCs).

“The newer, higher performance, safe materials from next-gen FFF players such as RIZE are helping to drive a transformation in the 3D printing sector that are particularly relevant now as the world emerges from a pandemic. The durability and safety advantage that’s possible from next-generation 3D printing systems merits the attention of any engineering or design team that wants to give their users the best, and safest, tools,” Tim Greene, research director, 3D printing, for IDC said in the release.

The adaptive printer is the first deliverable to come from the RIZIUM Alliance, which is a new collaboration between RIZE and industry partners, like Sindoh, to drive safer, more sustainable 3D printing. The RIZE 2XC was made with a redesigned Sindoh dual-extrusion 3D printer, which can run engineering-grade RIZIUM materials that are moisture-resistant, recyclable, and zero emission.

RIZIUM One material

“We based our material on safety – it’s engineered for safety, durability, and strength,” Kalambi told me. “They’re medical grade, and especially in today’s context, things like sanitizing and being able to wash it with alcohol or acetone is important. Materials science is our differentiating factor.”

Kalambi told me that the ‘C’ in the company’s new 2XC printer stands for ‘composite,’ since RIZE takes a “material-led approach.”

“What we have done now is taken our material portfolio and partnered with industrial players, so we can offer it to a broader market of users.”

Sindoh is applying the innovative RIZIUM materials, engineered for user health, so that customers in various sectors on its platform can use a safe, sustainable material at a lower price.

“With Sindoh, we’re working with the same materials,” Kalambi explained. “We have done lots of engineering efforts with them to get the printer ready for our materials, worked on nozzles and the drive train and the slicer, all of that, and made the printer far more robust. It’s a printer that is a joint product. It’s a new hybrid platform, releasing a set of products with Sindoh that’s based on our polymers and materials science.”

The two independent extruders on the RIZE 2XC are designed for composite filaments and hardened materials. One extruder runs RIZIUM polymers and composites, which can be washed with just soap and water, while the other runs the unique RIZIUM Support, created by RIZE specifically for filament-based extrusion 3D printers. All in all, RIZE says that its new printer offers a safe way to fabricate durable, strong, functional components, without any unnecessary post-processing.

“The RIZE 2XC is especially well-suited for a variety of Industrial and Academic applications,” Ricco Busk, Director at RIZE partner CADSYS, stated. “Given the high demand for having 3D Composite Parts, we are able to, almost immediately, sign up a customer for the RIZE 2XC to use in their innovative plastic molding applications, such as robotic grippers. Combining RIZE’s material advantage in the high quality, easy to use 2XC 3D platform opens doors to new markets for 3D printing that need precision parts made safely and sustainably.”

Kalambi told me that the RIZE 2XC has plenty of great features, such as a heated build plate, a camera for monitoring prints, and automatic bed leveling. Because the company’s Augmented Polymer Deposition (APD) platform has not been added, the system does not print in color, but he said that it does have “a much bigger build volume” in comparison to other desktop printers.

“It’s great for home and office use, as those industries wanted a good printer within a certain price point,” Kalambi explained. “Lots of 3D printing is being done in schools and offices, which is why we partnered with Sindoh…they have lots of knowledge in the education field. That industry had a requirement for a low-cost printer, and RIZE wanted to be able to offer a more affordable option.”

Kalambi also said that the RIZE 2XC is great for 3D printing industrial parts.

According to the RIZE release, this new printer is the first that has brought “safe, sustainable 3D printing” to the industry’s compact sub-$5k market, which can help organizations struggling to get back on their feet in a post-pandemic world get a leg up over the competition.

“Sindoh’s cooperative R&D effort with RIZE showed us that we chose the right partner indeed – a partner as committed to innovation in materials and technologies as we are. We’re delighted to expand our reach into more segments of the market through the cooperative solutions we are creating with RIZE,” said BB Lee, CEO, 3D Printing Division at Sindoh Co., Ltd.

The RIZE 2XC will be available from RIZE’s network of channel partners starting June 30th, for an introductory price of $3,995 in the US market and €3,995 in Europe. In the meantime, I’ll be keeping my ear to the ground, because Kalambi said RIZE will have some more exciting news to share with us in mid-July.

The post RIZE Introduces Adaptive 2XC Desktop 3D Printer for Offices, Schools, and Homes appeared first on 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing.

Posted on

Interview With Kevin Eckes of Selective Powder Deposition Firm Aerosint

Most new startups in 3D printing are rather boring. There’s lots of whizzbang but very little fundamental innovation. Most of them are looking to score not looking to improve 3D printing as a whole. Aerosint may very well be one of the few startups that could bring true innovation to 3D printing. The startup is looking to change how powder bed systems recoat themselves, how they deal with supports and in the process open up a whole host of new materials and applications while also reducing the cost of parts. We interviewed Kevin Eckes of Aerosint to find out more about this potentially very exciting startup.

What is Aerosint?

Aerosint is a company founded in 2016 on the idea that selective powder deposition will make additive manufacturing more capable, scalable, and less expensive. We have developed a mechanical system that replaces the normal powder recoater in SLS/SLM systems so that multiple powders can be deposited in a single layer with spatial selectivity.

What challenges do you hope to solve for people?

We believe our technology will allow for the scaled production of advanced parts that are topology-, material-, and cost-optimized. Most powder bed fusion AM techniques currently are focused primarily on geometric capability, far less on part cost, and almost not at all on efficiency gains through the use of multiple materials. In short, we want to help additive manufacturing live up to its hype and be able to build the best parts possible at the lowest cost.

How does your technology work?

The system we have developed deposits small ‘voxels’ of powder in a line-by-line fashion from rotating drums that pass over a build platform in an SLS or SLM machine. Unlike the single-material recoating process used in SLS/SLM/MJF/binder-jetting processes, in using our system one has full three-dimensional control over powder material placement, which is required for building multi-material parts.

Why is the rotating drum essential?

It’s the most efficient geometry for the application. With a rotating drum the only limits of the X and Z dimensions are the size of the machine enclosing the Aerosint recoater system. The length of the rotating drum (i.e. axial dimension) limits the Y-dimension of the build.

What do you mean with multi-material?

We mean, quite literally, more than one material. Our system can pattern two or more powdered materials side by side. Of course, sintering them together is an altogether different matter, and we cannot circumvent fundamental physical limitations. Therefore, two polymers or two metals with similar thermal processing temperatures can realistically be incorporated into a single part using the Aerosint powder deposition system to structure the constituent powders prior to sintering.

There’s also a possibility of making what we call “pseudo multi-material” parts. These would be parts in which the bulk of the part is a base polymer, and certain regions include composite materials composed of the same base polymer with an additive, such as glass fiber, carbon fiber, or even nanoparticles to locally enhance the part’s mechanical, electrical, or magnetic properties.

Recently we’ve demonstrated the co-deposition and sintering of flexible TPU with rigid polystyrene (left) as well as multiple colors of TPU (right).

Can you do gradient materials as well? Gradient and multiple materials at the same time?

You can think of the powder images we create as physical versions of binary (i.e. black and white) images. So, while we can’t pattern truly continuous gradients we can do dithered ‘digital’ gradients to form interfaces between two materials (see above, left). In our system, theoretically, you can pattern as many materials as you have rotating drums. In practice, there is, of course, a limit based on the machine size but 2, 3, or 4 drums per machine could be realized.

How can this be used to optimize surfaces?

Surfaces can be optimized in terms of material properties and material savings. One useful application is to be able to create parts that have a hard surface material to resist wear and abrasion combined with a tough inner material to resist brittle fracture (left). This strategy is even more attractive if the cost of the surface material is high relative to the bulk material. In another example, a copper part with high thermal conductivity can be made stronger and more resistant to stress with a steel surface (right).

What are the advantages of this (relative to other AM techniques)?

The most mature multi-material 3D printing processes are dependent on the curing of multiple expensive polymer resins, sometimes containing nanoparticles (as is the case for conductive resins). These resins are often quite expensive, and they tend to age and become brittle after printing. Because of these and other disadvantages, this resin jetting and curing process is better suited for prototyping rather than production-scale AM.

Powder bed AM processes have proven to be the fastest, most cost-effective, and scalable of all the various AM methods. We wanted to develop a process that builds on existing powder bed technology to make it able to process multiple materials. Our powder deposition system is also material-agnostic — we can handle polymer, ceramic, and many metal powders.

What are the cost advantages of your technology compared to SLS?

SLS of polymers is rather wasteful because unfused powder that has undergone an hours-long heated build process changes chemically in ways that prohibit its direct re-use in a subsequent build. Some amount can be reused when mixed with virgin powder, but there is almost always an amount which is thrown away.

The problem is worse for high sintering temperature materials, such as PEEK and other high-performance thermoplastics. It happens that these materials are also quite expensive to begin with, so any powder savings translates to significant cost savings. Our system allows for the deposition of expensive build powders only where needed, because a cheap, non-fusing support powder (such as ceramic) can be co-deposited in each layer.

By using ceramic powders as reusable support how much money would I save? 

With conservative assumptions for build density and powder refresh rate based on data provided to us by a major service bureau, we estimate that the value of material wasted in a full build of PEEK powder printed in an EOS P800 system is about 32,000 USD. After only 38 full builds, the cost of powder waste would exceed the cost of the EOS P800 machine itself!

For PA12 and similar conservative assumptions, for a full build in an EOS P760 system the powder waste cost amounts to nearly 3,000 USD.

With an Aerosint recoater depositing both non-fusing ceramic support powder and polymer build powder, we believe the powder waste rate could be reduced to less than 1% of the overall amount of powder input in the process. For PEEK this represents less than 500 USD/build, or a savings of over 31,500 USD savings per build. In the case of PA12 the waste would be reduced to 74 USD/build, corresponding to a savings of 2,926 USD/build. Considering the hundreds of builds a major service bureau would do per year per machine, the cumulative savings can easily amount to millions of dollars per year.

A more detailed analysis is here. 

What materials are you working on?

For the multi-material case, we have active projects to combine flexible and rigid polymers like TPU and PA12, multi-colored polymers, and steel and copper. For the powder savings case we are focused almost exclusively on PEEK, and we’re developing a powder deposition system that will withstand the extreme operating conditions needed for PEEK SLS.

I don’t see how you could use this to combine 3D printing circuits and polymers in one step. Won’t you melt or deform the polymer?

For circuits, indeed an approach cleverer than simply melting copper and polymer side by side is needed since bulk copper has a much higher melting temperature than any thermoplastic. We know of some interesting work being done to develop sinterable polymer composite materials that can be made selectively conductive in a post-processing step. As long as the matrix polymer of the conductive precursor material has a similar melting temperature as the surrounding bulk material, it should be possible to print conductive paths and insulating material at once using our system.

What kind of metals can you combine with each other?

Our first efforts are focused on steel and copper. With the same prototype system other metal-metal combinations should eventually be possible to validate.

How mature is your technology?

Our technology is maturing quickly but many aspects still need to be validated. In particular we need to combine our powder deposition expertise with the materials processing expertise of others to push our technology closer to the market.

What kind of partners are you looking for, and why should they work with you?

Our technology should enable multi-material AM, but we have limited in-house experience and resources to explore the space of material combinations that might be possible. We’re interested in working with research institutions and especially R&D departments of companies that have identified a need for multi-material additive manufacturing for improving their products and market position.

We’ll have a booth next week at Formnext in Frankfurt among the other startup challenge winners, and we welcome anyone to stop by to discuss applications and collaboration possibilities.