Raspberry Pi Zero Stand #3DThursday #3DPrinting

Raspberry Pi Zero Stand by hafenjunge Thingiverse

A nice take on a familiar design shared by hafenjunge on Thingiverse:

This is a remix of the Raspberry Pi Zero Stand from Adafruit. No screw required when you put the Raspberry Pi at the back and an hat to the front.

I made this because the Pimoroni enviro hat had wrong temperature reading because of the heat from Raspberry Pi. Now the stand acts as an divider between the two boards and the reading are almost perfect.

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Water Pump With 4 Different Turbines #3DThursday #3DPrinting

Water Pump With 4 Different Turbines TESTING AND BUILDING VIDEO by LetsPrintYT Thingiverse

Fun video with print testing out turbine designs. Shared by LetsPrintYT on Thingiverse and YouTube:

Testing out four 3D printed turbine designs. The water pump is powered by a 775 electric motor and power supply is a power drill battery (3.0ah NiCad). In this video, u will see building tutorial and after that testing. Results were really different from what I personally expected, I think this project was really useful and educational because the turbine what I was thinking as most powerful was actually…well u see in the video.
Every 3D printed parts that u see in this video are printed with PLA filament and with 0.8mm nozzle. Free STL Files included as always.

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Arduino – RC Radio Transmitter frame #3DPrinting #3DThursday

Arduino RC Radio Transmitter frame by john lenfr Thingiverse

john_lenfr shared this project on Thingiverse!

This is a modified version of the original design by @Thediyguy999.

Just added some space on the border to fit LCD screen nicely.
And create frame for microswitch to be able to fit small buttons.

Download files: https://www.thingiverse.com/thing:4371108


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

3D Hangouts – Solenoid Drums and Lego Neon LED signs #3DPrinting

Learn Guide
https://learn.adafruit.com/midi-solenoid-drum-kit/

YouTube Video
https://youtu.be/dhKYxDzyXqI

Code on GitHub
https://github.com/adafruit/Adafruit_Learning_System_Guides/blob/master/MIDI_Solenoid_Drum_Kit/code.py

Adafruit Feather M4 Express
https://www.adafruit.com/product/3857

12v Solenoids
https://www.adafruit.com/product/413

Half size Perma-Proto
https://www.adafruit.com/product/1609

ULN2803A Darlington Driver
https://www.adafruit.com/product/970

Black LED Acrylic
https://www.adafruit.com/product/4594

Flexible Neon NeoPixel Strip
https://www.adafruit.com/product/4310

DC barrel jack
https://www.adafruit.com/product/610

2.1mm DC Plug
https://www.adafruit.com/product/2788

12V 5A power supply
https://www.adafruit.com/product/352

Feather Header Kit
https://www.adafruit.com/product/2886

Mini Toggle Switch
https://www.adafruit.com/product/3221

Fully Reversible USB Cable
https://www.adafruit.com/product/4111

10-wire ribbon cable
https://www.adafruit.com/product/3890


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!

Caster Replacement #3DPrinting #3DThursday

divreig shares:

This is a verry pricise fit. Please scale 0-3% depending on metrial. It will reseist going on but you should here a pop and then the base should spin freely around. it should not fall off when correct right side up. Use M4 Screw and nut for axel . For berst results drill out hole wiht 5/32″ or 4mm Drill Bit, (way better then just printed).

download the files on: https://www.thingiverse.com/thing:4367516


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Sphere optical Illusion #3DPrinting #3DThursday

Syzguru11 shares a 3d printed Sphere optical Illusion

download the files on: https://www.thingiverse.com/thing:4367552


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Sturdy Raspberry Pi 4B Case #3DPrinting

yeetongu shares:

A rugged case for the Raspberry Pi 4B using cutouts of the Prusa filament spool as impact-absorbent guarding without impeding airflow. The centre piece retains the Pi while the top and bottom plates screw on to clamp the spool cutouts in place.

download the files on: https://www.prusaprinters.org/prints/37233-sturdy-raspberry-pi-4b-case


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Raspberry Pi Zero W Camera Case and holder #3DThursday #3DPrinting

Raspberry Pi Zero W Camera Case and holder by WaldMaker Thingiverse

A tidy package shared by WaldMaker on Thingiverse:

I wanted to use one of my Raspi Zero W as am Octoprint Camera and eventually also as an Octoprint Server.

But I didn’t find a case for the Zero W with the new V2.0 Camera.

So I designed one and would like to share it with you!

After successfully using this webcam clip on my Anycubic I3 mega X

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Dyson attachment holster with hinge #3DThursday #3DPrinting

Dyson attachment holster with hinge by bufi Thingiverse

Take away one worry when you have to bust out the Dyson. Shared by bufi on Thingiverse:

This is a remix from
https://www.thingiverse.com/thing:2175557

I added the hinge from the Bag Clip
https://www.thingiverse.com/thing:3238736

so that the clip does not break when using pla

Download the files and learn more


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

3D Hangouts – Chasing LEDs and Pull Copters


Learn Guide:
https://learn.adafruit.com/pixel-chase-game/

Code on Github
https://github.com/adafruit/Adafruit_Learning_System_Guides/tree/master/Pixel_Chase_Game

YouTube Video:
https://youtu.be/TFzHOti1bYc

Adafruit Feather M4 Express
https://www.adafruit.com/product/3857

Mini Skinny NeoPixel Strip
https://www.adafruit.com/product/2969

24mm Mini Arcade Button
https://www.adafruit.com/product/3433

10-wire ribbon cable
https://www.adafruit.com/product/3890

3D Parts Library on GitHub
https://github.com/adafruit/Adafruit_CAD_Parts

Liz Clark – @BlitzCityDIY
https://www.youtube.com/channel/UCbAUKL7V6OOGumQEeDMYQvQ

Layer by Layer – Using Package Generator
https://youtu.be/uygVegKuBdw

Layer by Layer CAD Tutorials Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Pull Copter Finger Ring – agepbiz
https://www.prusaprinters.org/prints/35410-pull-copter-finger-ring
https://youtu.be/PDQn199txKo

Magnetic Ear Savers Remix
https://www.thingiverse.com/thing:4554889

Halo Energy Sword Prop
https://www.thingiverse.com/make:831390


649-1
Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

The Adafruit Learning System has dozens of great tools to get you well on your way to creating incredible works of engineering, interactive art, and design with your 3D printer! If you’ve made a cool project that combines 3D printing and electronics, be sure to let us know, and we’ll feature it here!