Category: 3DThursday

Every week we’ll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses!

Can holder / Dice Mug
Søren Berg Pedersen
https://www.thingiverse.com/thing:3345027
Prusa MK2S
Grey PLA
14hrs 09mins
X:206 Y:182 Z:112mm
.15mm layer / .4mm nozzle
20% Infill / 1mm retract
210C / 60C
120g
60mm/s

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

In this tutorial we’re taking a look at a 3D printed, print-in-place, hinge with user parameters. The features are scalable so the tolerances can be easily adjusted for manufacturing.

Fusion 360 Share Link:
https://a360.co/2FOY35Y

3D Printing Projects Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG

3D Hangout Show Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y

Layer by Layer CAD Tutorials Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb

Timelapse Tuesday Playlist:
https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Phillip Forbes shared on thingiverse:

Baby Groot in Carbonite

“I am Groot.”
“I know.”

I re-sized the box from the original to fit Groot and repaired a few things in the mesh so it would look and print better.

I got the best results by printing Groot at 45 degrees and adjusting my support angle to match. I also had to use a few supports for the control panels on the main box, mostly to keep the underside from sagging.

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Colin Catch shared on thingiverse:

GRUMPY MONSTER

Self Portrait.
Found a photo of this guy on Pinterest and modelled him for a friends little ‘un.
I think he’s a character from Rayman so credit to the game designers for the original idea.
It is split to make painting and inserting the eye easy so make sure you put the eye in before gluing the two halves together.

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Lots of fun #3dprinted #Adafruit projects this year, here’s our favorites! See them all on learn.adafruit.com #diy #electronics

Motorized Camera Slider MK3
https://learn.adafruit.com/motorized-camera-slider-mk3

LED Sand
https://learn.adafruit.com/animated-led-sand

Thermal Camera
https://learn.adafruit.com/thermal-camera-with-display

Cookie Roller
https://learn.adafruit.com/circuit-cookie-roller

Media Dail
https://learn.adafruit.com/media-dial

CircuitPython Sound Box
https://learn.adafruit.com/circuitpython-sound-box

Wire Spool Carousel
https://learn.adafruit.com/wire-spool-carousel

Desktop Fume Extractor
https://learn.adafruit.com/desktop-fume-extractor

3D Printed Tesla Cable Holder
https://learn.adafruit.com/3d-printed-tesla-cable-mount

Car Qi Charger
https://learn.adafruit.com/tesla-qi-charger

Automatic Dice Roller
https://learn.adafruit.com/automatic-dice-roller

Webcam Cover-Up Lego brick with Adabot Mini Fig
https://learn.adafruit.com/lego-webcam-cover

Touch Tone for Circuit Playground Express
https://learn.adafruit.com/touch-tone-for-circuit-playground-express

Drone Claw
https://learn.adafruit.com/drone-claw

LED Trampoline
https://learn.adafruit.com/led-trampoline

LED Glowing Slime
https://learn.adafruit.com/led-glowing-slime

Firework Ignitor
https://learn.adafruit.com/electric-ignitor

Mount for CRICKIT
https://learn.adafruit.com/mount-for-crickit

LEGO Crickit Rover
https://learn.adafruit.com/lego-crickit-rover

Crickit Paddle Wheel Boat
https://learn.adafruit.com/crickit-boat

Rack and Pinion Bot
https://learn.adafruit.com/rack-and-pinion-bot

Gmailbox
https://learn.adafruit.com/gmailbox

Zelda: Breath of the Wild – 3D Printed Bladesaw
https://learn.adafruit.com/bladesaw

Crickit Lab Shaker
https://learn.adafruit.com/crickit-lab-shaker

Hocus Pocus Book – Hallowing Eye
https://learn.adafruit.com/hocus-pocus-book-eye

Princess Peach LED Crown
https://learn.adafruit.com/bowsette

El Wire Stick Figure
https://learn.adafruit.com/el-stick-figure

NeoTrellis Game
https://learn.adafruit.com/neotrellis-box-game

Prop-Maker Lightsaber
https://learn.adafruit.com/lightsaber-featherwing

NeoPixel Bike Light
https://learn.adafruit.com/neopixel-headlight

GPS Tour Guide
https://learn.adafruit.com/gps-tour-guide

NeoTrellis M4 Bumper
https://learn.adafruit.com/neotrellis-m4-bumper

Motorized Grinch Fireplace
https://learn.adafruit.com/grinch-fireplace

New Years Eve Ball Drop
https://learn.adafruit.com/new-years-eve-ball-drop

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

drcameron shared this project on Thingiverse!

This is heavily based on the Xaphoon, a version of a mini saxophone with the sound between a clarinet and a saxophone. All parts work well in PLA and PETG according to my tests. I haven’t tried ABS, but this should work just fine in that too. The video (https://youtu.be/deijf9jOcm4) demonstrates some of the 3DPminiSax’s capabilities and highlights my poor playing ability. Please don’t hold it against me. I designed the parts in TinkerCAD.

See more!

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Shared by gzumwalt on Thingiverse:

“Ping Pong Popper” (named by our nieces, nephews and grandkids) is an easy to make 3D printed toy for the young ones (and some old ones) in our family, and they all love it!

Just two 3D printed parts, a spring, some string and a ping pong ball saves the grandparents / aunt / uncle (my wife and I) around $25.00 USD for a trip to the local indoor pizza parlor / arcade in an attempt to win one of these. And if we do win one, well, they’re broken within an hour. Now I just print another (the green Ping Pong Popper is for my youngest grandson Gabe)!

As usual, I probably forgot a file or two or who knows what else, so if you have any questions, please do not hesitate to point them out as I do make mistakes in plenty.

Download the files and learn more

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Shared by XYZAiden on Thingiverse:

This is a print-in-place soft robotic gripper powered by a small solenoid.

Download the files and learn more

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!

Chaz493 shared this project on Thingiverse!

I modified the wave lamp base to be used with the LED strip i had handy and then created a cap to keep the lamp together. The LED strip can be purchased at Five Below (https://www.fivebelow.com/multicolor-led-light-strip.html). The strip will require a trim at the end in order to fit. I recommend printing the lamp section with glow in the dark PLA.

See more!

---

Every Thursday is #3dthursday here at Adafruit! The DIY 3D printing community has passion and dedication for making solid objects from digital models. Recently, we have noticed electronics projects integrated with 3D printed enclosures, brackets, and sculptures, so each Thursday we celebrate and highlight these bold pioneers!

Have you considered building a 3D project around an Arduino or other microcontroller? How about printing a bracket to mount your Raspberry Pi to the back of your HD monitor? And don’t forget the countless LED projects that are possible when you are modeling your projects in 3D!