Optomec advances aluminum Directed Energy Deposition (DED) additive manufacturing

Aerosol Jet Printing (AJP) and Laser Engineered Net Shaping (LENS) company Optomec has announced an advancement in the capability of its LENS Directed Energy Deposition (DED) 3D printers.  The development means that Optomec’s range of metal 3D printers can now be used to deposit any aluminum alloy, including those recently developed with improved properties for […]

Is 3D Printing a Threat to Forging?

If you close your eyes and meditate hard enough, plunging yourself into a deep transtemporal trance, you may be able to conjure up your ancient ancestors wielding a mighty hammer to smash and shape a hot piece of iron against an anvil. The world’s oldest recorded metalworking process, forging still exists today, albeit in a form somewhat removed from its inception over 6,000 years ago.

Forging processes apply force to shape metal. Most often, modern forging is associated with high temperatures heating metal workpieces to the point that they can be formed by machine-driven hammers or presses, sometimes using a die to smash the material into a specific geometry. However, there are other forging techniques that use warm or cold temperatures that ensure that metal parts don’t expand as a result of high heat and then shrink, thus resulting in better tolerances.

In the additive manufacturing (AM) industry, we love to talk about the various traditional manufacturing processes that are already being disrupted by 3D printing and forging is no different. Exactly how AM will disrupt the world of forging, however, is different from how it is impacting, say, casting and machining.

Forging has its major advantage in the physical strength of forged parts, which, due to the fact the internal grain structure deforms to follow the general shape of the part, are stronger than cast or machined parts. The cost of materials for forging processes is usually cheaper, but forging presses and dies can be costly, and parts usually require secondary processes, such as CNC machining, to achieve final tolerances.

Therefore, forging is usually reserved for less geometrically complex parts that need to be manufactured in a highly repeatable way from less expensive metals, such as iron and steel. This might mean wheel spindles, kingpins, axle beams and shafts for automotive parts; valves and fittings in oil and gas; pliers, hammers, sledges and wrenches in hardware and tools; connecting rods, cylinders, discs in general industry; shells, triggers, and other artillery parts; and bulkheads, spars, hinges, engine mounts, brackets, and beams in aerospace. Obviously, some of these parts can crossover from one vertical to another (e.g., brackets and hinges)

Those familiar with AM technologies may start to get a feel for where AM is best situated for impacting the forging market: low-geometric complexity, yet high strength material properties. If you’re thinking like we are, you are starting to consider the possibility of directed energy deposition (DED) for the fabrication of near-net-shape parts.

DED offers many of the same benefits and fits many of the same applications as forging, while providing some additional advantages. Using blown powder or a metal wire, DED can rapidly form a medium-to-large sized part to near-net-shape. Often referred to as “blanks”, these components are then finished using CNC machining.

Blanks 3D printed using Norsk Titanium’s Rapid Plasma Deposition process. Image courtesy of Norsk Titanium.

DED can create a metal part closer to the final desired shape than forging, without the need for tooling. And, when it comes to more expensive materials like titanium, DED can potentially be more cost effective. For forged parts that would typically require dies, DED can be significantly faster. In turn, DED has the potential to reduce die, material and machining costs for certain components.

That same Norsk blank machine finished to final shape. Image courtesy of Norsk Titanium.

Specifically, those components will be low in number, when mass manufacturing doesn’t make sense and AM will actually be cheaper than forging. This means short runs of specialty components and prototypes. In other words, aerospace is the primary sector for DED as an alternative to forging at the moment. There are numerous DED companies targeting the aerospace industry, with aircraft manufacturers qualifying the processes and parts for installation on aircraft.

When it comes to part strength, DED components experience large thermal gradients during the deposition process that result in residual stresses that can lead to distortion and negatively affect the overall strength of the part. In some cases, heat treatment may even need to be implemented during the actual production of a part in order to relieve stress.

Naturally, systems manufacturers are working to overcome these issues, including closed-loop quality control and monitoring, as well as simulation software capable of compensating for stresses that will be experienced in a printed part.

Due to the issues discussed here, forging is not likely to be threatened by AM, but complemented by it. Forging is still the go-to choice for mass manufacturing sturdy, geometrically simple components, while DED can be used for small numbers of (often medium-to-large) specialty parts that would otherwise require tooling or must be made from high-performance, expensive metals. This might include structural components for the Boeing 787 Dreamliner or titanium brackets for the A350 XWB.

Once a DED system is brought in for such projects, auxiliary applications can then be found for the technology. For instance, DED machines can be used to repair dies for forging or to deposit additional features onto forged parts. Arconic actually developed a novel additive process called Ampliforge in which DED parts are first manufactured and then finished with forging to ensure the proper material properties of the components.

[Feature image courtesy of AMETEK.]

The post Is 3D Printing a Threat to Forging? appeared first on 3DPrint.com | The Voice of 3D Printing / Additive Manufacturing.

Spirit AeroSystems receives first Norsk titanium 3D printed part

American aerostructure manufacturer Spirit AeroSystems has confirmed the receipt of its first 3D printed structural component. The first product of an existing partnership between the company and Norwegian-American Rapid Plasma Deposition (RPD) developer Norsk Titanium, the part has been installed in the forward fuselage of a Boeing 787. As the sole producer of the nose […]

3D Printing Industry Review of the Year July 2018

The month of July saw a plethora of partnerships and announcements from the Farnborough International Airshow as well as an abundance of funding for 3D printing startups in New Zealand. Furthermore, the 3D printing industry welcomed a new range of filaments from Amazon, while observing the legal battle between Cody Wilson’s open-source 3D printed firearm […]

Airbus to help qualify GEFERTEC metal 3D printer for aerospace-grade production

GEFERTEC, the German developer and provider of 3DMP metal 3D printers and technology, is to deliver an industrial-scale arc403 machine to international aeronautics company Airbus. Together with German private sector research organization the Bremen Institute for Applied Beam Technology (BIAS), Airbus is preparing the arc403’s 3DMP metal 3D printing process for use in the aerospace industry. […]

3D printing news Sliced Siemens, ExOne, Stratasys, Massivit, CELLINK, Formlabs, Star Rapid

This edition of our 3D printing news digest Sliced asks the following questions: Is advanced manufacturing destined to destroy jobs? Will 3D printing benefit from trade wars between the US, Europe and China? How is bioprinting advancing and what are the latest career moves and opportunities across the 3D printing industry? Also, 3D printing news from Siemens, […]

Norsk Titanium starts qualification of 3D printed production at Spirit

In advancement of a commercial agreement inked in July 2017, Norsk Titanium has initiated the qualification of the first additive manufactured part for Spirit AeroSystems (MYSE:SPR). With this move, Norsk has achieved validation for the production and industrialization of its Rapid Plasma Deposition (RPD) process. Mike Canario, CEO of Norsk Titanium, comments, “I am very proud […]

Norsk Titanium leads aerospace production as New York site is officially added to Boeing’s Producers List

Norsk Titanium, a Norwegian company that supplied the world’s first aerospace-grade, 3D printed titanium components for Boeing, has been officially added to the Qualified Producers List (QPL) for the multinational aircraft corporation through its Plattsburgh, New York Development and Qualification Center (PDQC). This milestone follows a string of successes for Norsk, including the approval from the […]